What do oxidizers react with




















Preparedness and Spill Procedures. Managing Laboratory Safety. Laboratory Audits. Annual Audit Specialty Audits. Biological Material Registration. Institutional Biosafety Committee Registration. Laser Registration. Registration and Program Information. Radioactive Material Permits. X-Ray Registrations. Bloodborne Pathogens Program. Hazard Communication Program HazCom. HazCom Program Information.

Hazardous Material Transportation. Safety Training Curriculum and Prerequisites. Training Records. Access Training Records and Print Certificates. Laboratory Safety. Chemical Safety. Biological Safety.

Laser Safety. Radiation Safety. Hazardous Material Transport. Non-Laboratory Personnel Safety Training. Electrical Safety. Waste Pick Up. General Information. Oxidizing chemicals are materials that spontaneously evolve oxygen at room temperature or with slight heating or promote combustion. This class of chemicals includes:. Strong oxidizers are capable of forming explosive mixtures when mixed with combustible, organic or easily oxidized materials.

Personnel handling oxidizing chemicals must wear adequate eye protection. Ordinary prescription glasses do not provide adequate protection unless they meet this standard and are marked as such. Gloves should be worn when handling oxidizing chemicals. Disposable nitrile gloves provide adequate protection against accidental hand contact with small quantities of most laboratory chemicals.

Appropriate protective clothing should be worn if the possibility of skin contact is likely. Open-toe shoes are not appropriate when handling chemicals in a laboratory or in other areas where there is a potential for exposure. Brandeis employees who work with hazardous chemicals must be apprised of the hazards of chemicals present in their work area. This training must be provided before initial assignment to a lab and distribution of keys or must work under supervision before training occurs.

Lab personnel need to be trained on how oxidizers react with other materials, the identity and location of oxidizers in the lab, the proper measure to handle and store oxidizers and measures to be used to clean up spills of oxidizers. The use of certain concentrations of perchloric acid must be performed in a fume hood equipped with washdown facilities. The need for safety shielding should be reviewed and utilized any time there is a risk of explosion, splash hazard or a highly exothermic reaction.

All manipulations of oxidizing chemicals, which pose this risk, should occur in a fume hood with the sash in the lowest feasible position 18 inches or less.

Grand Valley State University. Lab Safety. Oxidizers What are oxidizing chemicals? Examples of Oxidizers Gases fluorine, chlorine, ozone, nitrous oxide, oxygen Solids nitrites, nitrates, perchlorates, peroxides, chromates, picrates, bromates, chlorites, chlorates, permanganates Liquids fluorine, chlorine, ozone, nitrous oxide, oxygen.



0コメント

  • 1000 / 1000